But Barry, Bill was not talking about SO2R. He was
replying to 'what consitutes SO1R?'.
My observation is that you can have SO2R capability in
your rig and only use SO1R by choice! It's not the rig
to me, but rather how you use that rig that constitutes
the 'operating class.'
Using a second receiver in the same rig or two separate
receivers, or a wide view spectrum analyzer or two
separate (or more) rigs or for that matter transmiitting
and receiving at the same time is plainly not SO1R.
Phil Sussman
Clayton, Ohio
----------------
Quoting Barry <w2up@mindspring.com>:
>
> Bill,
> Not necessarily true. When I do RTTY SO2R, more often than not, I
> alternate CQs on 2 bands. As soon as R1 goes into rcve, R2 starts
> CQing. I've found it more productive than listening on the second
> band. This is unique to RTTY. Besides the fact you don't need to
> listen to anything on RTTY, there's really no way to hold 2 freqs on CW
> or SSB.
> 73,
> Barry
> > Quoting Bill Turner <dezrat@copper.net>:
> >
> >
> >> If the RX is off when the TX is on, it's SO1R. The advantage of SO2R
> >> is listening while transmitting.
> >>
> >> Bill, W6WRT
> >>
> >>
> >
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
> >
>
> --
>
> Barry Kutner, W2UP
> Newtown, PA
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|