At 03:59 PM 8/14/2005, IronmanY2k wrote:
>I would recommend that we operate on 1.809Mhz (1.810 is the QRP calling
>freq.).
_________________________________________________
1809 is pretty close to the QRP frequency. If 40 meters is any indicator,
those guys often use pretty broad receivers. I'd suggest we stay a little
farther away, say 1805. 4 kHz will make little difference with SWR but a
big difference with receiver overload.
Bill, W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|