Hello Saad: Glad to see you will be activating YK with RTTY. Looking
forward to working you.
If I may offer some advice: MMTTY works fine all by itself. It can be
integrated with other programs if you like, but it is not truly necessary.
I am not familiar with DX4WIN, but I do use it with N1MM Logger (which is
free) and it integrates perfectly.
As Tim, KU4J, suggested, it is a good idea to have your software thoroughly
tested here in the US where help is readily available. The RTTY community
will be glad to help via internet of course, but face to face may be more
effective.
And by the way, I have tested MMTTY side by side against a number of TNCs
and it outperforms them all, so far. Save your money. :-)
Good luck!
--
73, Bill W6WRT
_______________________________________________________________
Original Message:
At 10:28 PM 4/6/2005, Saad Mahaini wrote:
>I'm still debating if I should buy an old TNC (PK232, etc) to take with
>me for TTY, or bring myself up to the 21st century and learn how to do
>it with strictly software.
>
>I operate TTY here (N5FF) using DX4WIN with TNCs (Hal and PK232), so I
>know how to do that. I usually run YK1BA using DX4WIN on my laptop. I
>understand there is a way to interface MMTTY (which I have never used)
>to DX4WIN, and just run TTY strictly on the computer with no TNC. I
>have not investigated the mechanics of doing it this way yet.
>
>What is the recommendation here? And what will it take to get setup and
>operational with the MMTTY /DX4WIN combination.
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.1 - Release Date: 4/1/2005
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|