To: | RTTY Reflector <rtty@contesting.com> |
---|---|
Subject: | Re: [RTTY] HAL ST-8000 and 6000 vs. Sound Cards |
From: | Kok Chen <chen@mac.com> |
Date: | Sat, 29 Jan 2005 10:48:20 -0800 |
List-post: | <mailto:rtty@contesting.com> |
On Jan 29, 2005, at 6:23 AM, psussman@pactor.com wrote: Rather that TNCs are easier to set up because they come with instructions .... I think I agree with Phil here. My twist on the statement is that the reason could be because a software based modem can (emphasis on the word "can") be better than TNCs so it may be easier set up your station to max out the decoding capabilities of a TNC than it is to max out the decoding capabilities of a software modem. ... while software stuff requires a lot of patience or a dedicated Elmer to get it right. I don't think it is difficult to provide the tools within the modem app itself to aid proper set up, and be able to bypass a human Elmer. An example of a good tool is actually in a hardware box -- the Timewave 599zx. That box has an AC millivoltmeter built right in. You can very easily adjust the gain of the audio chain so that its A/D converter is optimally set up. It also has a built in AFSK generator (generates tones, diddles, RYRY) for adjusting the transmitter. As a couple of folks have repeatedly mentioned here in the past: if you are not printing at least as well with a proven good software modem than you can with a TNC, the likelihood is you need to look closer at how everything is put together at your station. I would first make sure that the A/D converter is top notched (don't just look at how many bits it supports but look for the actual noise floor numbers, whether it supports balanced inputs, etc etc -- the stuff the professional recording world looks for), with gains in the audio chain adjusted for maximum dynamic range and never clipping (RITTY has always bragged about the use of a non-limiting front end, for what I believe are solid reasons), and with as much hum/noise removed as possible. In most cases, with the basics done properly, you can do as well or better than a TNC using just a good "textbook" software modem with no special tweaks. 73 Chen, W7AY _______________________________________________ RTTY mailing list RTTY@contesting.com http://lists.contesting.com/mailman/listinfo/rtty |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [RTTY] RttyCompare, VE3NEA |
---|---|
Next by Date: | Re: [RTTY] HAL ST-8000 and 6000 vs. Sound Cards, Ian White, G3SEK |
Previous by Thread: | Re: [RTTY] HAL ST-8000 and 6000 vs. Sound Cards, psussman |
Next by Thread: | Re: [RTTY] HAL ST-8000 and 6000 vs. Sound Cards, Ian White, G3SEK |
Indexes: | [Date] [Thread] [Top] [All Lists] |