RTTY
[Top] [All Lists]

Re: [RTTY] Rigblaster Pro USB help

To: "Sid Ashen-Brenner" <sashen@swbell.net>
Subject: Re: [RTTY] Rigblaster Pro USB help
From: "joseph lutz" <kwm24@earthlink.net>
Reply-to: kwm24@earthlink.net
Date: Sat, 8 Jan 2005 03:19:57 -00
List-post: <mailto:rtty@contesting.com>
Hi Sid,

   Now you know why I am so screwed up!! It is the PLUS
not the PRO I have - I do not know why I even typed that.
But the manual that was with the unit does not mention it,
nor did I find anything up at the web site - or am I blind
also??  I remember when I opened up on Christmas morning
I thought something was missing - as the carton did not have
PLUS on it - nor the manual. After digging around in the 
box I came upon a USB to Serial Adapter wrapped by itself
in the paper.  
Anyway Sid, I guess then the serial cable that they included
with the parts list isn't even used - right?  The only thing
that was on the parts list of the rb Plus that could possibly
be equated to the usb/serial cable is :
MISC - Other cables or assessories that you ordered!!!

I thank you Sid - and I will hook it up like I did with my
NOMIC - except I will not use the serial cable but the
usb/serial cable.  
73 and thanks again.
Joe




All messages and attachments scanned by Norton AntiVius Auto
                              checker prior to being sent.



> [Original Message]
> From: Sid Ashen-Brenner <sashen@swbell.net>
> To: <kwm24@earthlink.net>
> Date: 1/8/2005 3:02:34 AM
> Subject: Re: [RTTY] Rigblaster Pro USB help
>
> Joe,
>
>          All the USP Cable will do is replace the Serial Cable that 
> connected to the Nomic.  You will still need all the audio cables that
were 
> used with the Nomic .. likely plugged in to the same places on the
computer 
> as before.  There "should be" some diagrams with the PRO that show how to 
> connect the unit to both the computer and to the radio .. if not, the 
> manual on West Mountain's web site should have it.  I know that I managed 
> to get my Plus working without loosing "too much" hair, I'd think the PRO 
> ought to be a bit better!
>
>                  Good luck,
>                  Sid   N0OBM
>
> At 08:35 PM 1/7/2005, you wrote:
>
>
> >Hi there -
> >
> >I know I should have kept with my little NOMIC - but the daughter got
> >me the PRO USB for Christmas and I am trying to get it set up for this
> >weekend - no results.  Have sent email to WMR but will probably not
> >hear from them till sometime next week.
> >Is there anyone out there that is using this model of the PRO?  I cannot
> >find any documentation that even mentions the USB usage.  Seems
> >odd, unless I am dumber than dirt [which most say is true], and all I
> >have to do is hook the cable to the USB port of the laptop and the
> >other end to the serial port of the PRO.  Doing this, does this do away
> >with the cables from the mic/spkr ports on the laptop to the rig?
> >[AH - life was easy with my C-64 and pcpakrat II!!!]
> >Any help would be greatly appreciated.
> >73,
> >Joe W7LPF
> >
> >
> >
> >
> >
> >All messages and attachments scanned by Norton AntiVius Auto
> >                               checker prior to being sent.
> >
> >
> >
> >
> >_______________________________________________
> >RTTY mailing list
> >RTTY@contesting.com
> >http://lists.contesting.com/mailman/listinfo/rtty
>
> Sid Ashen-Brenner   Salina, Kansas    N0OBM   EM18et
> Internet : sashen@swbell.net   Home page: http://www.qsl.net/n0obm 



_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>