In a message dated 3/12/2004 10:17:50 AM Eastern Standard Time,
rtty-request@contesting.com writes:
Date: Fri, 12 Mar 2004 07:16:21 -0800 (PST)
From: "k0bx@qsl.net" <k0bx@yahoo.com>
To: rtty@contesting.com
Subject: Re: [RTTY] need help interfacing TS850 to Hal DXP38
Message-ID: <20040312151621.27477.qmail@web40411.mail.yahoo.com>
In-Reply-To: <005301c40840$e480ec40$0a00a8c0@mbd>
Content-Type: text/plain; charset=us-ascii
MIME-Version: 1.0
Precedence: list
Reply-To: k0bx@qsl.net
Message: 11
Tom, I do not know if this is a correct statement or
not?
The prewired 13 pin cable is $5.95 and has all 13 pin
wired.
As for the cable that go with the Rascal, for the
newer Kenwoods, TS-2000, TS-870 and TS-570 there is a
cable that supports FSK.
For the older Kenwoods, TS-940, 950 and 850. Yes you
are correct they do not support FSK. On the 850 you
need a RCA cable going to the RS-232 port from the RCA
on the back of the rig.
Joe K0BX
Maybe I am reading this out of context, but if you are saying that the 850
and 940 don't support FSK, that is not so. Mine did. And, I suspect the 950
does so, too.
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|