Re: [RTTY] Dual Receive with WriteLog/MMTTY

[Jerry Pixton <jpixton@shentel.net>]

John,

Look at my post. Since the two rtty/mmtty windows initialize to the same 
sound board to start, I would think it would work with just the one sound 
board.

Jerry, W6IHG


At 09:52 PM 1/6/2004 -0500, WA9ALS - John wrote:
> > Has anyone set up dual receive (two decoders on one signal) in WriteLog
> > using two MMTTY rttyrite windows instead of a TNC and MMTTY?  The
> motivation
> > for doing so is to have MMTTY windows with different profiles active in
> > parallel, e.g., normal, flutter and multi-path.  I've been trying to get
> > this to work and can't get the signal into more than one RTTY Control
> window
> > at a time.
>
> I've done it with 2 radios, so same difference if you just split the audio
> from one radio into 2 soundcards.  See
> http://www.qsl.net/wa9als/so2r-mmttyx2.htm  I don't think you could do it
> with only 1 soundcard.  Sounds like fun - Hope you'll share your findings!
> ;-))  73, John (WA9ALS)
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty

------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/RadioTuner/
jpixton@shentel.net
------------------------------------------


_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty