Sounds like a rig problem. In FSK mode, the software should only be sending
ON/OFF data to the FSK input of the rig
Normally that's a software and AFSK type problem!
----- Original Message -----
From: "Frank R. Hammond" <FHammond@cfl.rr.com>
To: <rtty@contesting.com>
Sent: Wednesday, June 11, 2003 2:13 PM
Subject: [RTTY] FSK 700Hz Offset
>
> FSK TX/RX Offset
>
> I have a 700Hz offset between TX and RX for FSK that I cannot live with.
>
> I'm using MixW v2.07 set in mode RTTY using secondary PTT/RTTY port
> and an Icom 718 in FSK mode (with TxD feeding the rig).
>
> I do NOT have this problem when using AFSK with the LSB rig mode.
>
> Do I have a rig problem or a MixW settings problem?
> Why me, Oh Lord?
> How do I fix it?
>
> Regards to all from Frank (KC4GKY)
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
|