RFI
[Top] [All Lists]

Re: [RFI] Rfi help

To: "Kenneth G. Gordon" <kgordon2006@frontier.com>, Randy Davenport <pastor.spaceboy@gmail.com>, jwin95@yahoo.com
Subject: Re: [RFI] Rfi help
From: "chuck.gooden" <chuck.gooden@comcast.net>
Date: Sat, 16 May 2020 17:26:47 -0500
List-post: <mailto:rfi@contesting.com>
I beleive the connectors used on Rg214 are different part numbers and are more 
difficult to install correctly.Chuck K9LC
-------- Original message --------From: "Kenneth G. Gordon" 
<kgordon2006@frontier.com> Date: 5/16/20  3:55 PM  (GMT-06:00) To: Randy 
Davenport <pastor.spaceboy@gmail.com>, jwin95@yahoo.com Cc: rfi@contesting.com 
Subject: Re: [RFI] Rfi help On 16 May 2020 at 19:55, AA5CT wrote:> Two - 
shields?> That would be RG-214Correct. I was wrong.> Two shields each made of 
silver-plated copper braid.> Inner dielectric dimension is the same as RG-213 
cable> > RG-214 cable good (usable) to 10 GHz per spec sheets. 213 only ~ 1 
GHz.> > Not as flexible as RG-213 though on account of all that braid.> > For 
normal HF operations (single op) RG-214 cable would be significant 
overkill.Absolutely correct...and far more costly.Ken 
W7EKB_______________________________________________RFI mailing 
listRFI@contesting.comhttp://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>