RFI
[Top] [All Lists]

Re: [RFI] Politics and RFI

To: Joe <nss@mwt.net>
Subject: Re: [RFI] Politics and RFI
From: David Eckhardt <davearea51a@gmail.com>
Date: Sun, 18 Mar 2018 15:40:18 +0000
List-post: <mailto:rfi@contesting.com>
AM radio?  The FCC has given them permission to raise transmitted power to
overcome the RF fog.  That is the solution pushed by FCC at present.  Of
course, the BC broadcasters aren't going there because more RF power
equates to more $$ spent on supplying raw AC power from the grid.  When the
RF fog gets so bad that the FAA, public service, and military start
complaining, then, just maybe, something will be done.

The effort started by Dave, NK7Z to bring all this together with strong
evidence is a great step forward, but contributions are needed in real,
rigorously measured and documented data.  It's the best start in at least
bringing the problem to light that I can think of.  Read my report on the
plasma TV we once owned.  It's all there.  We need more of this!!!!!

Dave - WØLEV

On Sun, Mar 18, 2018 at 4:16 AM, Joe <nss@mwt.net> wrote:

> Get the broadcast industry involved?
> Even in small towns of like 5000 or less in population. Downtown, try to
> listen to AM radio. You can only hear a few stations that are strong enough
> to get above the noise.
>
> Joe WB9SBD
> Sig
> The Original Rolling Ball Clock
> Idle Tyme
> Idle-Tyme.com
> http://www.idle-tyme.com
>
> On 3/17/2018 11:07 PM, Dave Cole (NK7Z) wrote:
>
>> I completely agree, so the next question becomes-- how does one light
>> that fire?
>>
>> Write a congress person...    Not sure that will do any good, they are
>> all busy now anyway...
>>
>> Write the FCC, they already know the stuff coming in is tainted...
>>
>> I honestly see no reliable way to motivate the Government to fix the RFI
>> problem...
>>
>> A sad but I think realistic view for now...  I do what I can by ALWAYS
>> letting the vendor know about an RFI issue if I find one, and making as
>> much reasonable noise about it as possible... Beyond that, unless it costs
>> people money, I doubt this will get solved soon...
>>
>> Ideas?
>>
>> Perhaps a nation wide web based database of RFI generation locations
>> would help...  A bit of public shaming may help in some cases, but not
>> all...  Probably get the person hosting the site sued by someone...
>>
>> 73s and thanks,
>> Dave
>> NK7Z
>> https://www.nk7z.net
>>
>> On 03/17/2018 05:27 PM, David Eckhardt wrote:
>>
>>> Many, if not most, of the offending Chinese RFI generators come through
>>> Customs as a 'component'.  As such, there is no RFI/EMC requirement for
>>> compliance to FCC rules and regulations.  The burden of proof for a clean
>>> product w.r.t. EMC/RFI is the system integrator - the entity that
>>> assembles
>>> the components to make a product which you and I may buy. Typically, the
>>> system integrator does nothing unless he is caught.  The lighting
>>> industry
>>> is a prime example.  Much of that industry is still unaware that FCC has
>>> regulations regarding the industry.  Switching power supplies, electronic
>>> ballasts, electronic transformers and the like all come through Customs
>>> as
>>> components.  As such, FCC can't touch them.  However, once they are
>>> assembled into a final product, FCC has every right to require a clean
>>> bill
>>> of health wrt EMC/RFI.  Even many of the wall warts are designated as
>>> components, so there is no EMC/RFI ever addressed with them.
>>>
>>> HOWEVER, we can all attest to the FACT that the RF fog is getting worse
>>> and
>>> worse due to Chinese imports.  You/we need to change the law on what
>>> does/does not get through Customs scott free.  ALSO, light a fire under
>>> FCC
>>> to enforce the rules, especially Part 15, Subpart B and C.
>>>
>>> On Sat, Mar 17, 2018 at 6:36 PM, Jim Stahl via RFI <rfi@contesting.com>
>>> wrote:
>>>
>>> With the recent attention to trade deficits, unfair Chinese trade
>>>> practices, etc., might this be an opportunity to catch somebody’s
>>>> attention
>>>> to get tough on RFI certification and enforcement on all those cheap
>>>> Chinese RFI generators being imported and sold in the USA?
>>>>
>>>> I assume it would take more than a few random letters to Congressmen,
>>>> but
>>>> if somebody with appropriate connections might be able to push this
>>>> idea,
>>>> it could be a situation of never letting a good crisis go to waste.
>>>>
>>>>
>>>> 73  -  Jim   K8MR
>>>> _______________________________________________
>>>> RFI mailing list
>>>> RFI@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/rfi
>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>> RFI mailing list
>> RFI@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
>>
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>



-- 

*Dave - WØLEV*
*Just Let Darwin Work*
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
<Prev in Thread] Current Thread [Next in Thread>