Kurt,
This does amount to a serious scenario. If there is a switcher inside each
lamphead (Mike says he has sent as unit to a friend for analysis), then there
are 2 possible cures, neither of which is simple. The first would be to fit
all of the interconnecting power cables with ferrites as I described in my
post; the other would be to remove the LED "guts" from each head and replace
with halogen lamps, which can run direct from the 12 VAC. Alas, these
offending systems are not Mike's - they belong to his neighbor.
I suspect that applying the ferrite components would involve tearing up the
meighbor's yard near each lamp, and the halogen solution would require removal
of each lamp assembly for modification. Not good thoughts either way. I don't
think Mike has said how far these lamps are from his antennas. So, NOTE TO
MIKE: What is the approximate distance from these lamps to your antennas?
If the lampheads do contain switchers, there should be some Part 15 notices on
the lamps themselves or, at the very least, on the system box or package. If
none exists, then maybe these devices have not been submitted as Part 15. That
might indeed be worth some degree of investigation. However, keep in mind that
Part 15 does NOT address radiated emissions below 26 MHz, so no help with HF
RFI.
73, Dale
WA9ENA
-----Original Message-----
>From: KD7JYK DM09 <kd7jyk@earthlink.net>
>Sent: Mar 11, 2013 11:57 PM
>To: Dale <svetanoff@earthlink.net>, ka5s@earthlink.net, rfi@contesting.com
>Subject: Re: [RFI] Cree LED Bulbs?
>
>"bad news is that my "guess" about each lamp head containing a small
>switcher might be correct. If it is, wow - what a mess!"
>
>Well, that would be terrifying... Never even thought of such a thing.
>
>Kurt
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|