Joe,
Sorry to ask an obvious question but are you sure you're choosing the
correct update file? The version 2 install, by default, creates a new
directory at C:\Program Files\Ten-Tec\Orion V2 Update whereas the old
update directory was C:\TTOrion.
73,
Alan N5NA
Joe Giacobello wrote:
> I just downloaded and installed the version 2 firmware and did a master
> reset (but not on the memories or the filter settings). Although the
> installation program reported a successful upgrade, the radio is still
> reporting version 1.372 during the startup routine. I again reinstalled
> the firmware "successfully" and did a master reset again and I still see
> 1.372 on startup. I verified the installation using the supplied
> program and it reported everything was OK.
>
> Is the version number reported by the radio not changing when the
> upgrade is made or is there something else going on here? Or do I have
> to reset the memories and filters too? I was trying to avoid that.
>
> Any input would be appreciated.
>
> 73, Joe
> K2XX
>
>
> _______________________________________________
> Orion mailing list
> Orion@contesting.com
> http://lists.contesting.com/mailman/listinfo/orion
>
>
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|