It looks like the radio is not upgrading properly, Good thing is you
haven't lost the current firmware.
This has happened to me once or twice, I tracked it down to improper comm
port settings.
Are you direct to the radio or through a USB converter?
Best wishes,
Rich
K5SF
>From: Joe Giacobello <k2xx@swva.net>
>Reply-To: k2xx@swva.net
>To: "Orion @contesting.com" <orion@contesting.com>
>CC: Carl Moreschi <n4py@earthlink.net>
>Subject: [Orion] Version 2.054 Beta Installation Question
>Date: Fri, 17 Feb 2006 15:33:38 -0500
>
>I just downloaded and installed the version 2 firmware and did a master
>reset (but not on the memories or the filter settings). Although the
>installation program reported a successful upgrade, the radio is still
>reporting version 1.372 during the startup routine. I again reinstalled
>the firmware "successfully" and did a master reset again and I still see
>1.372 on startup. I verified the installation using the supplied
>program and it reported everything was OK.
>
>Is the version number reported by the radio not changing when the
>upgrade is made or is there something else going on here? Or do I have
>to reset the memories and filters too? I was trying to avoid that.
>
>Any input would be appreciated.
>
>73, Joe
>K2XX
>
>
>_______________________________________________
>Orion mailing list
>Orion@contesting.com
>http://lists.contesting.com/mailman/listinfo/orion
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|