[Orion] Re: Heil Pro-Set wiring for use with Orion

["RM" <kamar@inr.net>]

Tom,

I use a Heil Pro-Set with the Orion; and yes, I had RF problems on 15M. 

The problem with the Orion is similar to, or the same as I had with my Icom 
775DSP transceiver.  Go to the Heil website and look for their technical 
doc. on wiring the Pro for Icom rigs. 

Essentially they are taking the Pro Set's grounded shield and grounding it 
also to the chassis through the Mic connector.  I have done this and have 
not had any more problems. 


Ron, NU1U 

Tom Wagner writes: 

> Is there a way to wire the Heil Pro-Set to
> work with the Orion?  It looks like TenTec wants a shielded
> twisted-pair from the mic to pins 1 & 2, with the shield 
> grounded.  The Heil Pro-Set has a single wire coaxial cable.
> It works when connected between 1 & 2, but on high power 
> it is susceptible to rfi. 
>
> Has anyone solved this problem? 
>
> 73,
> Tom Wagner - N1MM
> Check out the N1MM Free Contest Logger at:
> http://www.n1mm.com
> http://groups.yahoo.com/group/N1MMLogger/   
>
> _______________________________________________
> Orion mailing list
> Orion@contesting.com
> http://lists.contesting.com/mailman/listinfo/orion

_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion