I am talking about the "firmware" on the ap-1000
Not the karlnet code, there is a system firmware which can be confirmed
using the configurator (before you upgrade)
I've updated several v3.70firmware/bootware ap 1000's to v4.45 karlnet
code with out issue
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com] On
> Behalf Of Jayson A. Baker
> Sent: Thursday, June 24, 2004 9:37 AM
> To: 'Karlnet Mailing List'
> Subject: RE: [Karlnet] Most stable 4.x? was Re: What are we all
> goingtodoforCPE's?
>
> 4.44-02
>
> Why on Earth would you be running 3.2 still?
>
> Regards,
> Jayson A. Baker
> Peak Internet Solutions
>
>
>
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]
> On Behalf Of Dan Metcalf
> Sent: Thursday, June 24, 2004 7:33 AM
> To: 'Karlnet Mailing List'
> Subject: RE: [Karlnet] Most stable 4.x? was Re: What are we all going
> todoforCPE's?
>
> Jayson - did you find out what "firmware" was on your ap-1000's? I
have
> found that firmware v3.70 and above support v4.45 with out issue
>
> For firmware v3.20 - forget it - I upgraded it and could no longer
> access the unit ( could ping it though )
>
> Dan
>
>
> > -----Original Message-----
> > From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com] On
> > Behalf Of Jayson A. Baker
> > Sent: Thursday, June 24, 2004 9:30 AM
> > To: 'Karlnet Mailing List'
> > Subject: RE: [Karlnet] Most stable 4.x? was Re: What are we all
going
> to
> > doforCPE's?
> >
> > 4.44-02 if using AP-1000's.
> > 4.45 otherwise.
> >
> > Regards,
> > Jayson A. Baker
> > Peak Internet Solutions
> >
> >
> >
> > -----Original Message-----
> > From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com]
> > On Behalf Of Bruno Lopes F. Cabral
> > Sent: Thursday, June 24, 2004 6:59 AM
> > To: Karlnet Mailing List
> > Subject: [Karlnet] Most stable 4.x? was Re: What are we all going to
> do
> > forCPE's?
> >
> > Hi there
> >
> > what would be the most stable 4.x version so far?
> > I mean, to use i.e. on a pair of RG1000s with
> > SENAO 200mW cards (2511CD+EXT2) on a simple PtP link
> >
> > any suggestions on firmware version to choose would
> > be greatelly appreciated
> >
> > TIA, !3runo
> >
> > Jayson A. Baker wrote:
> > > And yes, my biggest complaint is the upgrade to 4.45 on AP-1000's
> breaks
> > the
> > > 1000's (I posted earlier saying they finally started working, but
> they
> > only
> > > run for about 5 minutes). Tech support has no idea about it, or
> what to
> > do,
> > > other than to downgrade - real good. You'd think they'd test it.
> Glad I
> > > didn't upgrade our remote sites.
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > --
> > [This E-mail scanned for viruses by Declude Virus]
> >
>
>
>
> --
> [This E-mail scanned for viruses by Declude Virus]
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> --
> [This E-mail scanned for viruses by Declude Virus]
>
--
[This E-mail scanned for viruses by Declude Virus]
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|