ya gotta wonder if that's a windows arp cache issue, eh?
Caleb Carroll wrote:
Configurator 5.00-xxxx is retaining the Public IP Address & Public IP
Mask settings when the IP Host is set to "Obtain an IP address from DHCP
Server".
The easiest way to demonstrate this problem is by following the steps
outlined below:
1) Use Configurator to open the configuration of a KN-100 or RG-1100
2) On your DHCP server. Delete the lease for your KN/RG and then create
a temporary lease reserve (force the KN or RG to grab a different IP
address).
3) Go back to Configurator - Don't make any configuration changes! Just
select "Save Config" from the file menu.
4) Open the configuration of the KN/RG, 4) Click on the "Monitor" tab
5a) Click on "Local IP Address" - there will be 2 IP addresses listed
5b) Click on "IP Route" - the default route will be marked "Invalid"
See screenshots here:
https://carroll.pathcom.ca/serials/Configurator445_bug.html
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet