What? This has nothing to do with a "Windows ARP cache issue" dude.
*********** REPLY SEPARATOR ***********
On 2004-06-15 at 3:20 PM Brendan O'Bra wrote:
>ya gotta wonder if that's a windows arp cache issue, eh?
>Caleb Carroll wrote:
>
>>Configurator 5.00-xxxx is retaining the Public IP Address & Public IP
>Mask settings when the IP Host is set to "Obtain an IP address from DHCP
>Server".
>>
>>The easiest way to demonstrate this problem is by following the steps
>outlined below:
>>
>>1) Use Configurator to open the configuration of a KN-100 or RG-1100
>>2) On your DHCP server. Delete the lease for your KN/RG and then create
>a temporary lease reserve (force the KN or RG to grab a different IP
>address).
>>3) Go back to Configurator - Don't make any configuration changes! Just
>select "Save Config" from the file menu.
>>4) Open the configuration of the KN/RG, 4) Click on the "Monitor" tab
>>5a) Click on "Local IP Address" - there will be 2 IP addresses listed
>>5b) Click on "IP Route" - the default route will be marked "Invalid"
>>
>>See screenshots here:
>https://carroll.pathcom.ca/serials/Configurator445_bug.html
>>
>>
>>
>>_______________________________________________
>>Karlnet mailing list
>>Karlnet@WISPNotes.com
>>http://lists.wispnotes.com/mailman/listinfo/karlnet
>>
>>
>
>_______________________________________________
>Karlnet mailing list
>Karlnet@WISPNotes.com
>http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|