RE: [Karlnet] Bridge and route on the same KN200

[John Tully <tully@mikrotik.com>]

At 02:35 PM 4/28/2004, you wrote:
> John,
>
> Have you thought about supporting the KN PC Driver for Linux so you can
> setup a Satellite station off a KN TC network?

For 2.4GHz solutions, most people use our AP only and use some low cost 
client solution -- unless they need a very smart router at the client, and 
then they use our client solution also.  For 5GHz, people use all MikroTik 
RouterOS products (and usually www.routerboard.com products) for a complete 
high speed solution.

So, I don't think it would be so useful to have KN TC 2.4GHz client only 
support in our system.  If the Linux driver includes source, then it 
wouldn't be difficult to add it -- but are many people interested in this?

Also, we will have the so called 'polling' feature soon -- and from what I 
know about the Karlnet TC, ours will have some important features that are 
not in the TC.  For example, ours will use multiple rates (actually, ours 
uses the best rate for throughput) -- where I have read that with some/all 
TC versions you have to set only one rate for the AP.  Of course I am not 
an expert on TC, so I may be wrong.

John


> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of John Tully
> Sent: Wednesday, April 28, 2004 2:56 AM
> To: Karlnet Mailing List
> Subject: Re: [Karlnet] Bridge and route on the same KN200
>
> You can do that with a MikroTik RouterOS AP.
> http://www.mikrotik.com/docs2.8/interface/bridge.main
>
> John
> www.mikrotik.com
>
> At 06:15 PM 4/27/2004, you wrote:
> >It's a shame that with 4 interfaces on the KN-200 that you can't define
> L2
> >bridge groups - For example, define Interfaces 1 & 2 as "Group 1" and
> >Interfaces 3 & 4 as "Group 2" so that you can then route between Group
> 1 &
> >Group 2.
> >
> >*********** REPLY SEPARATOR  ***********
> >
> >On 2004-04-26 at 10:34 PM Paul Horak wrote:
> >
> > >Anybody know if you can bridge and route on the same
> > >radio (KN200 in this rather bizarre case :-))? If so,
> > >please can you share the config? Turning on routing
> > >seems to automatically deny bridging of IP traffic.
> > >
> > >Cheers,
> > >
> > >Paul
> > >
> > >
> > >
> > >
> > >
> > >__________________________________
> > >Do you Yahoo!?
> > >Win a $20,000 Career Makeover at Yahoo! HotJobs
> > >http://hotjobs.sweepstakes.yahoo.com/careermakeover
> > >_______________________________________________
> > >Karlnet mailing list
> > >Karlnet@WISPNotes.com
> > >http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
> >
> >_______________________________________________
> >Karlnet mailing list
> >Karlnet@WISPNotes.com
> >http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet