On 8 May 2003 at 9:46, Caleb Carroll wrote:
> Probably not. Karlnet firware aimed at functioning as CPE equipment is
> limited
> to that function and little else. With SR-4100 you can program it to be a
> TurboCell Base Station but this will only allow you to connect another RG, and
> not a Windows or Linux PC Client.
You're right. Thanks.
I need the following setup:
WISP (AP1000) --- HOME ---- BUILDING
Due to geographic constraints, I need "HOME" to be the conection
between the AP and the BUILDING. BUT I would like also to run
NAT (128K) in HOME.
My first idea (to avoid using a router or a linux box) was to use 2
RG's with Karlnet, but it would not work.
Since I could NOT route/nat at same time, I could not use a WPBASE+
either...
Maybe one of the RG's running a sec client would do the trick ?
Thanks,
Helio.
-
CompuLand ISP Admin
GnuPG Public Key: http://www.compuland.com.br/helio/gpgpublic.txt
|