You don't use No Base Stations on your backhaul links?
Or do you use the Turbocell Base Stations (This is a Base Station)
And Turbocell Base Station (This is a Satellite Station) for your
backhauls??
Nate
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Norm Young
Sent: Tuesday, February 11, 2003 9:02 PM
To: Karlnet Mailing List
Subject: Re: [Karlnet] turbocell advanced settings
Supposedly the wireless side regulates the client upload speed, and the
Ethernet bandwidth setting regulates the client download speed, but in
practice, I've only been able to effect a symmetrical bw limiting with these
settings. Anyone else had better luck?
And on another note about the Polling Base Station, I found to my great joy
that if I turned off polling on our backhaul, the ping times dropped down
into the low single digits, rather than the high double sometimes triple
digits. Should have been obvious, but it wasn't...
Norm
----- Original Message -----
From: "Bob Hrbek" <bhrbek@jagwireless.com>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Tuesday, February 11, 2003 9:38 AM
Subject: [Karlnet] turbocell advanced settings
> when configuring a TC AP, under the advanced settings there is an advanced
> tab where you set the network ID and 802.11 speed. There is also a
> bandwidth setting. Does this setting modify the sattelite upload or
> download or both?
>
> thanks,
> bob
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|