Karlnet
[Top] [All Lists]

RE: [Karlnet] prisim radios for AP-1000's

To: <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] prisim radios for AP-1000's
From: "Nate McLain" <nate@ctrail.net>
Reply-to: karlnet@WISPNotes.com
Date: Fri, 13 Dec 2002 20:21:51 -0600
List-post: <mailto:karlnet@WISPNotes.com>
Tony,

I hate to say this but we purchased about 10 of the 100mW cards that worked
part of the time. And didn't work at all in a flashrom setup.....
And I don't recall an offer to take them back.
But we found a use for them anyway....
At least we could fix that table that had one short leg... Worked great to
prop the table leg up. And when ya glue two of them together they made
outstanding coasters!!!  ;-)

But I have to say you do have lots of other good products....
Gotta love the POE adapters!

Nate


-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of Demarc (tony) 908-996-7995
Sent: Friday, December 13, 2002 7:29 PM
To: karlnet@WISPNotes.com
Subject: RE: [Karlnet] prisim radios for AP-1000's


That was the old card which worked fine for half and not so good for the
other half using TC, very few issue when they where use in a standard
computer in 802.11b mode.

We replaced the 2.0 cards with 2.5 for people using them with Turbocell
based products that where having problems before the EOL on these cards.
Since there very few issue.

Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Open Chat Server http://www.demarctech.com:8000
Yahoo IM: tonymorella
Wireless Solution Provider


> -----Original Message-----
> From: karlnet-admin@WISPNotes.com
> [mailto:karlnet-admin@WISPNotes.com] On Behalf Of John Benson
> Sent: Friday, December 13, 2002 3:17 PM
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] prisim radios for AP-1000's
>
>
> They don't work very long.  I tried one, and it worked for
> about half of a day, and then shut down.  The RG could not
> handle the power draw.  That was using the prism 2.0 100mw cards.
>
> John Benson
> Wireless Systems Engineer
> 801-427-0719
> Wnoc
>
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com
> [mailto:karlnet-admin@WISPNotes.com]On
> Behalf Of George Minich
> Sent: Friday, December 13, 2002 7:16 AM
> To: karlnet@WISPNotes.com
> Subject: Re: [Karlnet] prisim radios for AP-1000's
>
>
> How well do the 100mW work in the RG-1100's?  Which brand and
> model of the cards are people using with success?
>
> Thanks
>
> George
>
> ----- Original Message -----
> From: "Demarc (tony) 908-996-7995" <tonylist@wwwbiz.com>
> To: <karlnet@WISPNotes.com>
> Sent: Friday, December 13, 2002 3:35 AM
> Subject: RE: [Karlnet] prisim radios for AP-1000's
>
>
> > Bob
> >
> > We have many people using the 100mW cards with very good success
> > running TurboCell on the AP-1000. Disclaimer, this solutions is not
> > supported directly by Orinoco, Karlnet or Demarc. The only is the
> > noise level reading are not accurate, but version 4.31
> seems to have
> > changed something should know more about this is a few days.
> >
> > Sincerely
> > Tony Morella
> > Demarc Technology Group
> > Office: 908-996-7995
> > Cell: 908-246-9170
> > Fax: 908-847-0202
> > email: tony@demarctech.com
> > http://www.demarctech.com
> > Open Chat Server http://www.demarctech.com:8000
> > Yahoo IM: tonymorella
> > Wireless Solution Provider
> >
> >
> > > -----Original Message-----
> > > From: karlnet-admin@WISPNotes.com
> > > [mailto:karlnet-admin@WISPNotes.com] On Behalf Of Bob Hrbek
> > > Sent: Wednesday, December 11, 2002 6:07 PM
> > > To: karlnet@WISPNotes.com
> > > Subject: [Karlnet] prisim radios for AP-1000's
> > >
> > >
> > > What is working best with AP-1000's and Karlnet 4.x?
> > >
> > > I want to get rid of some of my amps to lower noise.   What
> > > will the trade
> > > off be if I replace my ORiNOCO radios and Amps with just a high
> > > power Prisim card?
> > >
> > > Thanks,
> > > bob
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> > >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
>
>
> _______________________________________________
>
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
>

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet




<Prev in Thread] Current Thread [Next in Thread>