George
You don't have NAT our routing on the RG correct? Also if you plug
directly into the RG does it work??
Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Open Chat Server http://www.demarctech.com:8000
Yahoo IM: tonymorella
Wireless Solution Provider
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com
> [mailto:karlnet-admin@WISPNotes.com] On Behalf Of George Minich
> Sent: Saturday, November 23, 2002 5:29 PM
> To: karlnet@WISPNotes.com
> Subject: Re: [Karlnet] Netgear or Linksys with 4.27 SOHO
>
>
> Hi Tony,
>
> it is an SR-4100 SOHO. I am able to communicate with RG
> through the Netgear since I was able to config the Karlnet
> parameters. It just does not seem to NAT for some reason.
> The funny thing is that I could ping 192.168.1.x devices on
> the other end of the RF link. Any ideas?
>
> Thanks
>
> George Minich
>
> P.S. I called you a couple of weeks ago and we played
> telephone tag for a bit. I am going to require some of your
> Demarc enclosures. I'll call you on Tuesday when I get back
> to the office.
>
> ----- Original Message -----
> From: "Demarc (tony) 908-996-7995" <tonylist@wwwbiz.com>
> To: <karlnet@WISPNotes.com>
> Sent: Saturday, November 23, 2002 4:57 PM
> Subject: RE: [Karlnet] Netgear or Linksys with 4.27 SOHO
>
>
> > Geroge
> >
> > What version of SOHO SR-4000 or SR-4100? Also the RG is plugged
> > directly into the Netgear/Linksys router with a cross over cable?
> >
> > Sincerely
> > Tony Morella
> > Demarc Technology Group
> > Office: 908-996-7995
> > Cell: 908-246-9170
> > Fax: 908-847-0202
> > email: tony@demarctech.com
> > http://www.demarctech.com
> > Open Chat Server http://www.demarctech.com:8000
> > Yahoo IM: tonymorella
> > Wireless Solution Provider
> >
> >
> > > -----Original Message-----
> > > From: karlnet-admin@WISPNotes.com
> > > [mailto:karlnet-admin@WISPNotes.com] On Behalf Of George Minich
> > > Sent: Saturday, November 23, 2002 3:09 PM
> > > To: karlnet@WISPNotes.com
> > > Subject: [Karlnet] Netgear or Linksys with 4.27 SOHO
> > >
> > >
> > > Hello all,
> > >
> > > I am testing a 4.27 SOHO on an RG-1100. I have
> bridging enabled
> > > (no NAT) and have assigned a private address
> > > (192.168.1.X) to the RG for private access. The RG is
> sitting on a
> > > bridged wireless link which connects to my public IP network.
> > > Running NAT on my Netgear (Netgear has a public address),
> I cannot
> > > seem to see any real world machines (IP's). However, I can ping
> > > private (192.168.x.x) devices on the other side.
> > >
> > > I am using the Netgear to DHCP private addresses to the
> machines
> > > as well. For the life of me, I cannot see any public IP's
> behind the
> > > netgear. I can only see private - including the ones on the base
> > > side.
> > >
> > > Any help would be greatly appreciated.
> > >
> > > Thanks
> > >
> > > George
> > >
> > >
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> > >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
>
|