-----Original Message-----
From: karlnet-admin@WISPNotes.com
[mailto:karlnet-admin@WISPNotes.com] On
Behalf Of Travis Brown
Sent: Monday, July 15, 2002 4:01
PM
To: karlnet@WISPNotes.com
Subject: [Karlnet] Bandwidth
problems
Importance: High
I'm
hoping I can get some really good and helpful suggestions on this one. It's
killing me.
Here's
the scoop:
Router
--> link --> base --> customers
-Router
represents my Cisco boundary router and T1's
-Link
is a series of bridged RG-1000's running Karlnet 4.02
-Base
is an AP-1000 running 4.02 as well
-Customers
(about 35 of them) that are almost all RG-1000's running a mix of 3.88 and up
Ping
the link: 10 ms
Ping
the base: 20 ms
Ping a
customer: 1000 - 3000 ms, throughput is garbage
Shut
off certain customers and the speeds get better for a bit. I guarantee at 5
p.m. tonight, the problem goes away. It'll be back tomorrow. This started
Friday, no significant changes to the network last week, but I've seen this
problem before.
Odd
side-effect: Unplug our Internet feed, the times all drop to 20-30 ms. Plug it
back in, the pings slowly climb back to 1-3 sec.
I
have three other bases that are not affected by this problem, all with less
than 20 customers.
This
is a super bad situation that I MUST get resolved or I'm toast. Thanks in
advance for an help you can offer.
Travis
--
==============================
M. Travis Brown,
MCSE
Network Systems Engineer
NetWave Internet
434.386.0656
travis@netwaveva.com
http://www.netwaveinternet.com
==============================