Karlnet
[Top] [All Lists]

RE: [Karlnet] Same song second verse

To: <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] Same song second verse
From: "Tony " <tonylist@wwwbiz.com>
Reply-to: karlnet@WISPNotes.com
Date: Wed, 24 Apr 2002 22:38:11 -0400
List-post: <mailto:karlnet@WISPNotes.com>
Sh*(T

That was a typo on my part :/

ROR is like SOHO and SAT under Karlnet 1 not 16.

Everything else is correct.

Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Wireless Solution Provider


-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of Bob Hrbek
Sent: Wednesday, April 24, 2002 5:07 PM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] Same song second verse


So..

TC Client = Karlnet Satellite...right?

ROR can talk to 16 TC Clients

COR can talk to 32 TC Clients 

TC ISP base 64 RG's?

TC isp base is what goes on an AP-1000 right?


----- Original Message ----- 
From: "Tony " <tonylist@wwwbiz.com>
To: <karlnet@WISPNotes.com>
Sent: Wednesday, April 24, 2002 3:58 PM
Subject: RE: [Karlnet] Same song second verse


> Bob
> 
> ROR - 16
> COR - 32
> TC ISP base - 64
> 
> There is a beta software with 128 but its not ready yet.
> 
> Sincerely
> Tony Morella
> Demarc Technology Group
> Office: 908-996-7995
> Cell: 908-246-9170
> Fax: 908-847-0202
> email: tony@demarctech.com
> http://www.demarctech.com
> Wireless Solution Provider
> 
> 
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
> On Behalf Of Bob Hrbek
> Sent: Wednesday, April 24, 2002 3:56 PM
> To: karlnet@WISPNotes.com
> Subject: Re: [Karlnet] Same song second verse
> 
> 
> So, you are saying that
> 
> A COR 1100 can only talk to 16 RG-1000 w/ TC?
> 
> What are the numbers of different clients that you can connect to the 
> different hardwares.  I realize that is a complicated question but it 
> doesn't seem to be documented anywere (except in the mind of Charles 
> :)
> )
> 
> I've heard with the latest FW
> 
> AP-1000 w/ TC FW can handle 96 TC (RG-1000) clients.   etc.
> 
> Can anybody (probably charles) detail the recommended max numbers for 
> the different configs (802.11b+, ROR -> ROR, COR -> ROR, COR -> RG?)
> 
> 
> 
> -Bob
> 
> ----- Original Message -----
> From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
> To: <karlnet@WISPNotes.com>
> Sent: Wednesday, April 24, 2002 2:40 PM
> Subject: RE: [Karlnet] Same song second verse
> 
> 
> > As in TC client, do you mean RG w/ TC?
> >
> > in that case, it's 16
> >
> > -Charles
> >
> > -----Original Message-----
> > From: karlnet-admin@WISPNotes.com
> > [mailto:karlnet-admin@WISPNotes.com]On
> > Behalf Of admin
> > Sent: Wednesday, April 24, 2002 2:10 PM
> > To: karlnet@WISPNotes.com
> > Subject: [Karlnet] Same song second verse
> >
> >
> > Hey guys,
> >    Since I can't get an understandable answer for this question on 
> > the
> 
> > wireless list, I will try here.
> >    If I have a COR1100 in COR mode, how many TC clients can it 
> > serve?
> > The Orinoco web site states 16 ROR's or 32 ORC's per channel. Is it 
> > different with TC?
> >
> > Thanks,
> >
> >
> > --
> > Eric L. Johnson
> > WarpSpeed Internet
> > 1-361-563-3742
> > --
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> 
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com 
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> 
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com 
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> 

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet


<Prev in Thread] Current Thread [Next in Thread>