[ct-user] CT 9.90.007 and Paddle

[gdaught6 at Stanford.edu (gdaught6@Stanford.edu)]

On 26 Jun 2003 at 20:20, David Robbins K1TTT wrote:

> Check that you aren't getting rf into the port... turn off or reduce
> radio power.  Doublecheck wiring and pin numbers, make sure no pins
> are shorted and that pullup resistors are properly connected.  Slow
> the speed way down and try to send single dits and dahs to see if
> maybe you have bounce in a paddle contact.  

Also, make sure that you've plugged the computer's keyed output 
into the straight key jack on the radio, and not the keyer jack.  (That 
drove me crazy once with a laptop and paddle that I KNEW worked, 
but an unfamiliar radio!)

73,

George T. Daughters, K6GT