How do I set up the "-enet" switch?
Do I need to set up a batch file to start CTWIN? Should there be a line like
"ctwin -enet"?
Are there nay other switches I should consider with CTWIN?
Tnx
Tony
N2TK
-----Original Message-----
From: Ken Wolff [mailto:kwolff@charter.net]
Sent: Sunday, June 23, 2002 08:52
To: n2tk@arrl.net; 'CT (E-mail)'
Subject: RE: [ct-user] Networking CTWIN
Use the -enet switch on startup.
9.75 has some fixes for the WRTC competitors.
* Fixed WTRC auto entry of zone
* Allow point and shoot without a TNC,
via entry of call and frequency over the CT
network
* fix time display in announce window
The hyperlink to ctwin975 was case sensitive, and wrong. You should be
able to download ctwin975 now.
- Ken
-----Original Message-----
From: ct-user-admin@contesting.com [mailto:ct-user-admin@contesting.com]
On Behalf Of N2TK
Sent: Saturday, June 22, 2002 8:53 PM
To: CT (E-mail)
Subject: [ct-user] Networking CTWIN
How do I set up CTWIN so I can network CTWIN? My PC's are talking to
each
other via the Ethernet cards. Now I need to setup CTWIN.
Also, what's the story on CTWIN975. Used CTWIN974 without a hiccup a
while
back. What's new in CTWIN975? Also, tried downloading CTWIN975, but no
luck
so far.
Tnx
Tony
N2TK
_______________________________________________
ct-user mailing list
ct-user@contesting.com
ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
http://lists.contesting.com/mailman/listinfo/ct-user
|