It looks like CT is looking in your root directory for the file. In your
config.sys file add the following line.
set ct=\progra~1\k1easo~1\ctwin
Or you can try adding that to the shortcut. Also make sure the shortcut says
to
'Start in' the CTWIN directory.
Or maybe you already had a CT= in your config file for when you were running
ct for dos?
Bob
n2xr
-----Original Message-----
From: ct-user-admin@contesting.com
[mailto:ct-user-admin@contesting.com]On Behalf Of Jim Demos
Sent: Sunday, June 23, 2002 12:22 PM
To: ct-user@contesting.com
Subject: [ct-user] CTWIN
I have been using CTWIN 9.73 without a problem. I updated to CTWIN 9.74 and
9.75 today.
When I try to start the program , I get the following error message: unable
to open C:CTY.DAT. The program then closes.
I tried reloading the program, I tried downloading a different CTY.DAT file,
which did not help.
Any ideas?
Thanks
Jim, K2DE
_______________________________________________
ct-user mailing list
ct-user@contesting.com
ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
http://lists.contesting.com/mailman/listinfo/ct-user
|