Do a RESET to clear out the unit. Then remember to set MYCALL W3UR.
Run it at a low baud rate, I am using 1200 as I was missing characters at
9600. You
could go even lower as the real thruput for 1200 packet is probably closer
to 12! Or
so it seems.
Doing as I have described I am running CT937 on an old 386sx25 with an
MFJ1270C.
There can't be much different between the B and the C
Ron N5IN
-----Original Message-----
From: Bernie McClenny, W3UR <bernie@dailydx.com>
To: CT Reflector <ct-user@contesting.com>
To: <ct-user@contesting.com>
Date: Tuesday, November 03, 1998 6:25 AM
Subject: [ct-user] Help ? CT9 and MFJ 1270B
>
>I can not get CT 9.27 and my MFJ 1270B to work correctly. Seems like
>not all of the data from the TNC makes it into the packet window. I
>also have to hit the enter key one extra time to get the response.
>
>Any clues? de Bernie
>
>--
>Bernie McClenny, W3UR (ex WR3E, WB3JRU)
>Editor of The Daily DX
>Editor of How's DX?
>3025 Hobbs Road
>Glenwood, MD 21738
>Fax 301-854-5105
>http://www.dailydx.com
>bernie@dailydx.com
>
>--
>Submissions: ct-user@contesting.com
>Administrative requests: ct-user-REQUEST@contesting.com
>WWW: http://www.contesting.com/ct/
>Questions: owner-ct-user@contesting.com
>
>
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|