Brian
To the best of my knowledge, the use of these cards are handled by the machine
BIOS and you should have no problem using them with CT as long as they are
configured with the standard base addresses and IRQ's.
There, any PCI card should work as long as it does not require special windows
drivers to function.
Mike
At 05:10 PM 08/10/98 , Brian Alsop wrote:
>
>Guys,
>
>Has anybody out there successfully used PCI com or LPT port cards
>with CT at the DOS level?
>
>If so, what cards and how?
>
>de ISA slot poor Brian/K3KO
>
=================================================
Mike Walker VA3MW
Corbeil Contest Club
http://www.qrz.com/wrad/directory.cgi?VA3MW
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|