Thanks Steve! Reconfigured TNC for 1200/8n1 with XON and loaded COMTSR2 for
the same parameters and VIOLA! It works.
Interesting that COMTSR wasn't recognizing other line comm parameters. Oh
well.
Thanks again for assistance.
Guy H. N7UN
>Did you actually set your TNC for 8N1 mode? CT ONLY supports 8N1 mode.
>I've been through this problem. First get your TNC working in 8N1 mode
>in DX4WIN and it will then work fine in CT. As you have discovered, E71
>mode will let you listen but you can't connect.
>
>Good luck,
>
>Steve K6UM
>wa8lly@pacbell.net
-----Original Message-----
From: Steve Lund <wa8lly@pacbell.net>
To: Guy Hamblen <tel1gah@is.ups.com>
To: <ct-user@contesting.com>
Date: Friday, April 10, 1998 1:09 AM
Subject: Re: [ct-user] CT9.36 and PK-88 Interface???
>> Guy Hamblen wrote:
>>
>> I am having trouble with the proper configuration parameters for
>> connecting my AEA PK-88 to CT via COM2.
>> The facts:
>> 1) The PK-88 talks to DX4WIN configured as 1200/E71 and Xon flow
>> control. COM2 configured with the same
>> port parameters.
>> 2) CT9.36 hears the PK-88 but I get gibberish. COMTSR2 configured as
>> 1200/E71.
>> 3) Tried 1200/N81, E81, N82, E82, E71, N71 with COMTSR2 but no joy!!!
>
>
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|