CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] N1MM Setting for Avoiding Zero Beat

To: jimk8mr@aol.com
Subject: Re: [CQ-Contest] N1MM Setting for Avoiding Zero Beat
From: Barry W2UP <w2up.co@gmail.com>
Date: Mon, 15 Nov 2021 08:16:03 -0700
List-post: <mailto:cq-contest@contesting.com>
Very good point to enable it.  it should be automatically disabled in SSB.

Barry W2UP

On Mon, Nov 15, 2021 at 8:09 AM K8MR via CQ-Contest <
cq-contest@contesting.com> wrote:

> Just please make sure this is done only for CW contests. Calling off
> frequency on SSB only makes things more difficult to copy, while not
> leaving the frequency any more clear.
>
> 73  -  Jim  K8MR
>
>
> -----Original Message-----
> From: K3TN via CQ-Contest <cq-contest@contesting.com>
> To: cq-contest@contesting.com <cq-contest@contesting.com>
> Sent: Mon, Nov 15, 2021 5:46 am
> Subject: [CQ-Contest] N1MM Setting for Avoiding Zero Beat
>
> In the Telnet > Filters window, the N1MM Logger software has a nice spot
> freq "randomizer" setting:
> Randomize incoming spot frequencies
>
> "Automatically adds or subtracts a small amount from the received spot
> frequency, so as to improve your chances of breaking a “packet pileup” when
> you click on a spot."
> 73 John K3TN
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
<Prev in Thread] Current Thread [Next in Thread>