For the purposes of CQWW and WPX recording, your transmit audio is not
required. They want to hear what you heard.
73,
Steve, N2IC
On 03/04/2017 09:01 PM, Trent Sampson wrote:
All this recording talk has made me revisit the shack configuration.
After testing the FT2000 FT950 I can get the RX audio out of the RECORD Jack on
the rear panel but no transmit audio on any modes
The Manual(s) says to set monitor to on - but there is no difference -
Modes will be SSB RTTY and CW.
Has anyone successfully done this or do I need to try some other point?
My issue is the FT5000 rigs are at a remote site and really want to be able to
sort this out prior to the 4 hour round trip to the remote.
Thanks in advance.
Regards
Trent
VK4TS
PO Box 275
Mooloolaba 4557
0408497550
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|