CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] Seeking mono-band Telrex info

To: <k1ttt@arrl.net>, <cq-contest@contesting.com>
Subject: Re: [CQ-Contest] Seeking mono-band Telrex info
From: "Paul Cassel" <paul@ve3sy.com>
Date: Mon, 2 Jul 2007 00:10:08 -0400
List-post: <mailto:cq-contest@contesting.com>
OK - now the lights are starting to come on.  I saw the screw holes and
thought a previous owner was attempting to secure a better electrical
connection.   As I indicated - the 5 page manual that I have leaves a lot of
detail to the imagination.

Any idea on the feed impedance of the T match feed?

Paul

> -----Original Message-----
> From: cq-contest-bounces@contesting.com [mailto:cq-contest-
> bounces@contesting.com] On Behalf Of David Robbins K1TTT
> Sent: Sunday, July 01, 2007 3:02 PM
> To: cq-contest@contesting.com
> Subject: Re: [CQ-Contest] Seeking mono-band Telrex info
> 
> On telrex the other element joints were usually secured by a screw through
> pre-drilled holes so there was only one possible adjustment on the
> elements
> at the tip.
> 
> 
> David Robbins K1TTT
> e-mail: mailto:k1ttt@arrl.net
> web: http://www.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> 
> 
> > -----Original Message-----
> > From: cq-contest-bounces@contesting.com [mailto:cq-contest-
> > bounces@contesting.com] On Behalf Of Paul Cassel
> > Sent: Sunday, July 01, 2007 13:48
> > To: cq-contest@contesting.com
> > Cc: 'Paul VE3SY'
> > Subject: [CQ-Contest] Seeking mono-band Telrex info
> >
> > I'm in the process of replacing my 3 element Hy-gain mono-banders with
> the
> > 5
> > element 15M532 on 15 and 10M5325 on 10.  The 20 m is 4 elements however
> I
> > have no manual and am unsure of the model number.
> >
> > We have successfully re-assembled the 10 and 15m antennas however the
> > manual
> > only shows measurements for the tip section.  Since the 15 and 20 m
> models
> > have multiple sections in each element, the tip measurements alone does
> > not
> > make much sense as the other sections have quite a range of overlap.
> >
> > Does anyone out there have center of boom to tip measurements for these
> > antennas?   I would also appreciate a copy of the 4 element manual for
> > same.
> >
> >
> > Thanks everyone
> >
> > Paul VE3SY
> >
> >
> >
> > _______________________________________________
> > CQ-Contest mailing list
> > CQ-Contest@contesting.com
> > http://lists.contesting.com/mailman/listinfo/cq-contest
> 
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>