Thanks Jim! That schematic is always nearby. It's been very handy over
the years. This one has me stumped.
73
Ken K4ZW
On Friday, June 6, 2025, Jim Brown <jim@audiosystemsgroup.com> wrote:
> On 6/6/2025 1:55 PM, Ken Claerbout wrote:
>>
>> I've been trying to repair a Ten Tec Titan Model 425 amp and I'm about
out
>> of ideas. Here's where I'm at.
>
> Hi Ken,
>
> About 15 years ago, when I still had Autocad running on a PC that worked,
I developed an overall drawing of the 425 schematics that were split
between a dozen or so pages in the manual to a single drawing that I saved
as a pdf, and also several segments of that drawing for interconnected
circuitry as individual pdfs. There are also a few notes on the drawing
sharing some of my own troubleshooting of the three 425s (of different
vintages) that I used to own.
>
> k9yc.com/publish.htm Scroll down.
>
> 73, Jim K9YC
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|