On 6/6/2025 1:55 PM, Ken Claerbout wrote:
I've been trying to repair a Ten Tec Titan Model 425 amp and I'm about out
of ideas. Here's where I'm at.
Hi Ken,
About 15 years ago, when I still had Autocad running on a PC that
worked, I developed an overall drawing of the 425 schematics that were
split between a dozen or so pages in the manual to a single drawing that
I saved as a pdf, and also several segments of that drawing for
interconnected circuitry as individual pdfs. There are also a few notes
on the drawing sharing some of my own troubleshooting of the three 425s
(of different vintages) that I used to own.
k9yc.com/publish.htm Scroll down.
73, Jim K9YC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|