Thanks Pete, I'll check that my settings are right.
On Wednesday, March 13, 2024 at 01:25:30 AM GMT, Pete Smith N4ZR
<pete.n4zr@gmail.com> wrote:
I think this thread is drifting off-topic. We're not talking about the
waveform of CW, but how long it takes after PTT before the KPA-1500 is
ready to amplify incoming signals. I've been there - at first my N was
getting trimmed into a non-character, so I now have a 50 ms. delay in my
Winkeyer (which controls PTT) to prevent that.
73, Pete N4ZR
On 3/12/2024 7:52 PM, Jim Brown wrote:
> On 3/12/2024 2:40 PM, Robert W5AJ wrote:
>> Best I can tell, FTdx10 CW with 6ms rise time is in par with K3
>> looking at QST In Depth review
>
> Fast rise time CAUSES clicks; beginning with the first K3, Elecraft
> uses a carefully shaped keying waveform that they call "sigmoidal,"
> (which I've heard described as a raised cosine) to provide nice sharp
> keying without clicks. I've heard that after a bad ARRL review for for
> their 6500 series rigs, they adopted that shaping or something like it.
>
> But rise time is the wrong thing to measure -- a spectral plot showing
> sidebands with a string of dits shows where the bodies are buried.
>
> Likewise, modulation with a sine wave, or even an IMD pair of sine
> waves, fails to expose splatter caused by processing like Yaesu is
> (was?) doing in those rigs.
>
> Splatter running VHF/UHF rover is far less likely to cause QRM except
> during band openings on SSB.
>
> FWIW -- I love my K4, but am still quite happy with my 2008-vintage K3
> with upgraded synth.
>
> 73, Jim K9YC
>>
>> It is interesting to watch the CW signals now with the BandScope
>> more so during CW contest!
>> Still own the K3 but I'm not likely to sport (Buy) a K4
>> The FTdx10 is ideal rig to carry on the 50Mhz rover trips, gets me
>> band scope & built in sound card
>>
>> 73 Robert W5AJ
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|