Doug, that's Lou W1QJ.
-----Original Message-----
From: Amps <amps-bounces@contesting.com> On Behalf Of Douglas Zwiebel
Sent: Friday, January 19, 2024 8:43 AM
To: amps@contesting.com
Subject: Re: [Amps] Amps Digest, Vol 253, Issue 6
Maybe some of you recognize who gudguyham@aol.com is.
I do not. Who are you? What is your callsign?
Clearly, the "next" post is by VE3HJ, since he included his call.
de Doug KR2Q
On Fri, Jan 19, 2024 at 8:56 AM <amps-request@contesting.com> wrote:
> Send Amps mailing list submissions to
> amps@contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.contesting.com/mailman/listinfo/amps
> or, via email, send a message with subject or body 'help' to
> amps-request@contesting.com
>
> You can reach the person managing the list at
> amps-owner@contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Amps digest..."
>
>
> Today's Topics:
>
> 1. Brand new updated PS board for Command Technology amplifiers
> (gudguyham@aol.com)
> 2. Re: Brand new updated PS board for Command Technology
> amplifiers (A J)
> 3. Re: Brand new updated PS board for Command Technology
> amplifiers (Jay Sturtevant)
> 4. HF2500 Board (Jay Sturtevant)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 19 Jan 2024 13:09:53 +0000 (UTC)
> From: "gudguyham@aol.com" <gudguyham@aol.com>
> To: Ham Amplifiers <ham-amplifiers@groups.io>, Amps Group
> <amps@contesting.com>
> Subject: [Amps] Brand new updated PS board for Command Technology
> amplifiers
> Message-ID: <865844263.188458.1705669793568@mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
> Recently I had occasion to have to rebuild THREE ?power supply units (
> located under the chassis) of the Commander line of amps. ?Two
> HF2500?s and one? VHF2000. ?Both use the same power supply board.
> ?Unfortunately all 3 boards were damaged by heat and the traces flaked
> off the boards in many spots. ?The traces that didn?t lift normally
> did when tried to unsolder and resolder new parts. ?The old boards are
> basically unsalvageable to rebuild.
> ?The boards are obviously old technology. ?They are a one time board
> as far as I?m concerned! ?As usual confronted with the need, I?ve
> developed a brand new board using new technology on boards with
> masking etc. ?I need these?boards to professionally rebuild the power
> supplies in these amps. ?I don?t trust Gerry rigging these old
> decrepit boards. ?The whole amplifier RF deck must be removed from the amp
> chassis to get to the power supply.
> ?You don?t want to go back on after using??band-aid?methods on the old
> boards. ?These amps are terrific amps and can go another 35 years
> with the breath of life from an all new board. ?Hopefully within the
> next month I will have these boards ready. ?I ordered extra for my
> supply for further repairs and for those who would like to attempt
> their own replacement I will have a limited supply I?ll be offering
> them?fully assembled and ready to install?The price is unknown at the
> moment until I can fully asses the expenditure. ?If interested I?ll
> take orders on a FCFS basis. ?I?m going to be installing one in my own
> personal amp as well. I have my own transformer for testing so if you
> don?t feel confident in doing the replacement yourself I only need the
> RF deck and can?do it here. ?It?s a shame??to see these good old amps
> sidelined for lack of parts. Thanks for reading Lou
>
>
> Sent from the all new AOL app for iOS
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 19 Jan 2024 08:47:59 -0500
> From: A J <iamfromcanadaalso@gmail.com>
> To: amps@contesting.com, gudguyham@aol.com
> Subject: Re: [Amps] Brand new updated PS board for Command Technology
> amplifiers
> Message-ID: <5550962f-fc63-4a46-beec-ccf19be3b3d1@gmail.com>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> I made these boards a few years ago and have them available and have
> sold numerous units.
>
> glass /solder mask etc.,
>
> If you need some let me know.
>
> AJ___ VE3HJ
>
>
> On 1/19/24 08:09, gudguyham--- via Amps wrote:
> > Recently I had occasion to have to rebuild THREE ?power supply units
> > (
> located under the chassis) of the Commander line of amps. ?Two
> HF2500?s and one? VHF2000. ?Both use the same power supply board.
> ?Unfortunately all 3 boards were damaged by heat and the traces flaked
> off the boards in many spots. ?The traces that didn?t lift normally
> did when tried to unsolder and resolder new parts. ?The old boards are
> basically unsalvageable to rebuild.
> ?The boards are obviously old technology. ?They are a one time board
> as far as I?m concerned! ?As usual confronted with the need, I?ve
> developed a brand new board using new technology on boards with
> masking etc. ?I need these?boards to professionally rebuild the power
> supplies in these amps. ?I don?t trust Gerry rigging these old
> decrepit boards. ?The whole amplifier RF deck must be removed from the amp
> chassis to get to the power supply.
> ?You don?t want to go back on after using??band-aid?methods on the old
> boards. ?These amps are terrific amp s and can go another 35 years
> with the breath of life from an all new board. ?Hopefully within the
> next month I will have these boards ready. ?I ordered extra for my
> supply for further repairs and for those who would like to attempt
> their own replacement I will have a limited supply I?ll be offering
> them?fully assembled and ready to install?The price is unknown at the
> moment until I can fully asses the expenditure. ?If interested I?ll
> take orders on a FCFS basis. ?I?m going to be installing one in my own
> personal amp as well. I have my own transformer for testing so if you
> don?t feel confident in doing the replacement yourself I only need the
> RF deck and can?do it here. ?It?s a shame??to see these good old amps
> sidelined for lack of parts. Thanks for reading Lou
> >
> >
> > Sent from the all new AOL app for iOS
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
>
> --
> Knowledge is Power and Power is Knowledge.___AJ___1967
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 19 Jan 2024 08:48:50 -0500
> From: Jay Sturtevant <k2ztdx@gmail.com>
> To: W1QJ Lou Parascondola <gudguyham@aol.com>
> Cc: Ham Amplifiers <ham-amplifiers@groups.io>, Amps Group
> <amps@contesting.com>
> Subject: Re: [Amps] Brand new updated PS board for Command Technology
> amplifiers
> Message-ID:
> <
> CALfamjuTfOqZOEoOVOpPzh6uvg2LK8FxiNhmRE-QHJ_PvGsF+Q@mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Thank you!!
>
> I would be very thankful to be able to purchase one of your boards
> from you for my Command HF2500!
>
> Please let me know how to proceed. I will get a check to you
> immediately or use another pay mennt method.
>
> Pat made a great amp!!
>
> THANK YOU!
>
> JAY, K2ZT
>
> On Fri, Jan 19, 2024, 8:10 AM gudguyham--- via Amps
> <amps@contesting.com>
> wrote:
>
> > Recently I had occasion to have to rebuild THREE power supply units
> > ( located under the chassis) of the Commander line of amps. Two
> > HF2500?s
> and
> > one VHF2000. Both use the same power supply board. Unfortunately
> > all 3 boards were damaged by heat and the traces flaked off the
> > boards in many spots. The traces that didn?t lift normally did when
> > tried to unsolder
> and
> > resolder new parts. The old boards are basically unsalvageable to
> > rebuild. The boards are obviously old technology. They are a one
> > time board as far as I?m concerned! As usual confronted with the
> > need, I?ve developed a brand new board using new technology on
> > boards with masking etc. I need these boards to professionally
> > rebuild the power supplies in these amps. I don?t trust Gerry
> > rigging these old decrepit boards. The whole amplifier RF deck must
> > be removed from the amp chassis to get to
> the
> > power supply. You don?t want to go back on after using band-aid
> > methods on the old boards. These amps are terrific amps and can go
> > another 35 years with the breath of life from an all new board.
> > Hopefully within
> the
> > next month I will have these boards ready. I ordered extra for my
> > supply for further repairs and for those who would like to attempt
> > their own replacement I will have a limited supply I?ll be offering
> > them fully assembled and ready to install The price is unknown at
> > the moment until I can fully asses the expenditure. If interested
> > I?ll take orders on a
> FCFS
> > basis. I?m going to be installing one in my own personal amp as
> > well. I have my own transformer for testing so if you don?t feel
> > confident in
> doing
> > the replacement yourself I only need the RF deck and can do it here.
> It?s
> > a shame to see these good old amps sidelined for lack of parts.
> > Thanks
> for
> > reading Lou
> >
> >
> > Sent from the all new AOL app for iOS
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> >
>
>
> ------------------------------
>
> Message: 4
> Date: Fri, 19 Jan 2024 08:56:25 -0500
> From: Jay Sturtevant <k2ztdx@gmail.com>
> To: amps@contesting.com
> Subject: [Amps] HF2500 Board
> Message-ID:
> <
> CALfamjuGVpENtjPb8OW2mgrR0U44myRf31sUjvNaq1V-gMex+g@mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Lou,
>
> I would be very thankful to be able to purchase one of your boards
> from you for my Command HF2500!
>
> Please let me know how to proceed. I will get a check to you
> immediately or use another pay mennt method.
>
> Pat made a great amp!!
>
> THANK YOU!
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> ------------------------------
>
> End of Amps Digest, Vol 253, Issue 6
> ************************************
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|