[Amps] Anyone know what the specs are for the two panel meters on Amp Supply LK450-500-550 series?

[wb0gaz via Amps <amps@contesting.com>]

 Are the panel meters (plate current, and grid current/HV) considered a milli- 
or micro-amp meter or a voltmeter? No info in the manuals. They are (per the 
schematic) both effectively across sub-ohm shunt resistors (grid current is 
across the sub-ohm shunt resistor to ground; plate current is across the 
next-up sub-ohm resistor towards the HV PS negative terminal.)

Thanks for any suggestion/info

Dave
  
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps