Don’t see why not since it appears the only different is PIV rating (600 V for
the 1N4007 vs 50 V for the 1N4001).
Kim N5OP
"People that make music together cannot be enemies, at least as long as the
music lasts." -- Paul Hindemith
> On Jun 30, 2021, at 7:35 AM, Mark - N5OT <r-emails@n5ot.com> wrote:
>
> Ameritron AL800H - two 3CX800s
>
> Meters have always behaved badly. Manual says when this happens, then D117
> may be shorted. I have the amp opened, and this diode tests shorted.
>
> Manual says this diode "protects the overload circuit and the meters."
>
> It's a 1N4001. I can't find any around here. I have about 1x10E18 1N4003
> diodes. Can I use a 1N4003?
>
> Thanks in advance.
>
> 73 - Mark N5OT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|