I spent a bit of time on that amp a while back. Involved a GI7B
conversion but warc operation was part of the goal. I forget which warc
band it was that the plate choke is self resonant close too, but it's
one of them. You would need to treat it for that.
My rationale for the project was to hone my construction, amp and design
skills so the investment has some payback in perpetuity. The amp today
sits on the shelf with a variety of problems, never to see RF again.
In fact, given I did spend a massive amount of time and money on that
project, in retrospect I have many times strongly recommend guys asking
me about the project to just track down an AL80b (single tube 3-500z
amp) instead. The AL80b is about 10x the amp in just most other than
sentimental respects. And it's relatively easy to sell an unmodified
SB-200 as well.
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
On 1/27/21 9:08 PM, Jim wrote:
And this was converting it to ONLY 160 meters. Not adding 160 to it.
If you search on SB200 160 meters, you will find many examples.
Thanks
73
Jim W7RY
On 1/27/2021 7:31 PM, Jim wrote:
There was an article in one of the 60-70s arrl handbooks about a 160
meter conversion to an SB200.
Thanks
73
Jim W7RY
On 1/27/2021 3:56 PM, Jim Koshmider via Amps wrote:
Has anyone in the group modified an SB-200 for 160 meters, or for
the WARC bands? Any info would be appreciated.
Thanks.
73,
Jim, K8OZ
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|