Thanks Jim.
did same. Ordered #16 enameled coated wire for extra windings, which came in
yesterday.
13.55Vac now with two tubes!
The #16 was TIGHT FIT!
Did take a few photos along the way for others that might be in same boat....
http://pages.suddenlink.net/w5aj/xmer/xmer.htm
73 W5AJ
Robert
Midland, Texas
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Jim
Sent: Wednesday, April 29, 2020 8:03 PM
To: amps@contesting.com
Subject: Re: [Amps] 3cx800 13.5Vac 3amp filament transformer
2ea 3cx800s only draw 3 amps. I use a small (12.6V 3A) radio shack transformer
and simply added more turns to the secondary for my 2X
3cx800 amp. Still working after 20 years.
Thanks
73
Jim W7RY
On 4/29/2020 7:59 PM, Robert wrote:
>
>
> Looking for recommendations of where/who to purchase 13.5Vac filament
> transformer
>
>
>
> story:
>
> Have several RS 12.6Vac rated 3Amps and those work fine for Single
> 3cx800 (measure 13.4Vdc)
>
> Now have project with dual 3cx800
>
>
>
> Thanks
>
>
>
> 73 W5AJ
>
>
>
> Robert
>
> Midland, Texas
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|