Terry, If you have idle current that means the amp is in operation mode and is
ready to work. When you drive the amp what is the input swr that your radio
sees? Does the plate current move up at all with drive power? This is the
info needed.
-----Original Message-----
From: Terry's ham <k7ny@live.com>
To: amps@contesting.com <amps@contesting.com>
Sent: Mon, Dec 9, 2019 10:58 am
Subject: [Amps] ten tec centurion qsk
The centurion I have is a black face that has a MC14093bcp in U1. The voltages
don’t seem right on it, has anyone else had a problem with this IC ? U2
MC14011bcp seems fine. The MJ15001G and all other transistors test good. It’s
pulling around 100 mils plate current can’t drive it, but this is the only
thing that seems to be out of line.
Thanks
Terry
K7NY
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|