Amps
[Top] [All Lists]

Re: [Amps] Palstar Commander II VHF Amp Issue

To: "Richard Solomon" <dickw1ksz@gmail.com>, "Amplifiers" <Amps@contesting.com>
Subject: Re: [Amps] Palstar Commander II VHF Amp Issue
From: "Carl" <km1h@jeremy.qozzy.com>
Date: Mon, 28 Oct 2019 10:17:18 -0400
List-post: <mailto:amps@contesting.com>
Heyboer has done several rewinds for me over the years plus replacements for a few others at far less than Dahl at both locations.

There is another rewinder down in hillbilly land that does a lot of CB stuff and branched into ham....cant remember the name.

Carl


----- Original Message ----- From: "Richard Solomon" <dickw1ksz@gmail.com>
To: "Amplifiers" <Amps@contesting.com>
Sent: Sunday, October 27, 2019 10:08 PM
Subject: Re: [Amps] Palstar Commander II VHF Amp Issue


I have verified that the XFMR
is indeed arcing over.

My crazy idea was in no way
intended to be permanent, but
just an interim fix until I can find
a replacement.

The Antek Toroids may work, I
just need to see how I can cram
them into the available space.

The 1500VA ones are too big, and
I would need to stack a pair of the
800VA units to get what I need.

I'll talk to them this week.

As an alternative, who rewinds
XFMR's these days ?

Tnx for the replies,

73, Dick, W1KSZ

On Sun, Oct 27, 2019 at 6:34 PM Ken Claerbout <kenk4zw@gmail.com> wrote:

Hi Dick - I might do it, to confirm the transformer is in fact shorted. I
would not use it as a permanent fix.  The risk is just too great.

73
Ken K4ZW

On Sun, Oct 27, 2019 at 9:08 PM Richard Solomon <dickw1ksz@gmail.com>
wrote:

I picked up the 2 Meter Model,
knowing it had an issue (Main
Fuse blows). It was priced right.

I had hoped it was a problem
with the Filter Caps or Diodes,
but it looks like the HV Secondary
is arcing over to the Frame.

A replacement may not be possible
so I am looking at a substitute.

Antek looks possible and I will be
contacting them later this week.

But, the Dr. Frankenstein in me is
thinking of floating the transformer
on a piece of Plexiglass until I find
a replacement. Am I nuts or what ??

Another thought is to dis-assemble
the transformer to see if I can locate
the arc-over on the coil. But that's a
lot of work.

What is the opinion of the "floating"
idea ??

Or, does anyone have a parts unit with
a good transformer ?

Tnx es 73, Dick, W1KSZ
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


---
This email has been checked for viruses by AVG.
https://www.avg.com

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>