Amps
[Top] [All Lists]

Re: [Amps] Tips For Winding a Plate Choke

To: <amps@contesting.com>, "Roger D Johnson" <n1rj@roadrunner.com>
Subject: Re: [Amps] Tips For Winding a Plate Choke
From: "Carl" <km1h@jeremy.qozzy.com>
Date: Thu, 10 Oct 2019 12:09:40 -0400
List-post: <mailto:amps@contesting.com>
The Alpha doent have the luxury of all the room in a Henry 8K which used that configuration.

A B&W 802 works 160-10 including WARC even in a souped up Alpha 77SX with the external transformer but dont know about the 76/78 on 30M.

Carl




----- Original Message ----- From: "Roger D Johnson" <n1rj@roadrunner.com>
To: <amps@contesting.com>
Sent: Thursday, October 10, 2019 11:38 AM
Subject: Re: [Amps] Tips For Winding a Plate Choke


A simpler alternative is to switch another choke in series for the lower
frequencies. This is quite simple to do. Think of two chokes in series
with a capacitor connected to the junction of the chokes. A relay grounds
the other side of the cap on the high frequencies thereby effectively
removing the lower choke from the circuit.

73, Roger


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


---
This email has been checked for viruses by AVG.
https://www.avg.com

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>