Amps
[Top] [All Lists]

Re: [Amps] Tips For Winding a Plate Choke

To: amps@contesting.com
Subject: Re: [Amps] Tips For Winding a Plate Choke
From: donroden@hiwaay.net
Date: Wed, 09 Oct 2019 20:38:50 -0500
List-post: <mailto:amps@contesting.com>
Also,  you  dont  want  to  mount
a plate choke parallel to a sidewall, nor the chassis. The stray C will screw up the choke, and shift its series resonances... down in freq.... which could easily cause catastrophic results.

IT seems that this effect could be used as an advantage on multi-band amps.

If the resonance is below a WARC band, a conductive paddle could be designed to follow the bandswitch position, pulling the resonance further downward, out of the way.

Don W4DNR


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>