Re: [Amps] Henry 3K-A choke failure...workaround?

[Jim <jimw7ry@gmail.com>]

Can you please draw me a diagram of the*plate choke *in the ground lead 
please?
Thanks
73
Jim W7RY

On 9/26/2019 9:59 PM, Ron wrote:
>   Jeff wa1hco millar wrote:
>
> > Hello wise ones...
> > Bought a nice 3K-A at a flea market and made one SSB contact.  On the
> > second contact it tripped off on HV overcurrent.  After some 
> > debugging, the
> > Plate choke is leaky to ground at HV but open with an Ohm meter.
> > Can I just put the choke up on insulated standoffs?
> > Any other suggestions?
>   It is a pleasure to be helpful.
>
>   The CURE is to put it in the ground side of the circuit, typically
> where the rectifier or the grounded side of the transformer goes to
> ground.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps