Amps
[Top] [All Lists]

Re: [Amps] clipperton l low output on ssb

To: mike vititoe <afa7mv@gmail.com>
Subject: Re: [Amps] clipperton l low output on ssb
From: John Simmons <jasimmons@pinewooddata.com>
Date: Tue, 19 Feb 2019 13:23:53 -0600
List-post: <mailto:amps@contesting.com>
Did you try it with the alc disconnected? Start with low drive from the exciter.

73,
-John NI0K

mike vititoe wrote on 2/19/2019 4:40 AM:
Ok I bought a clipperton l used unknown condition. I installed new harbach 
power supply board, new 572b tubes, resoldered some bad solder joints. I have 
2700v pv and it is doing 1000w on cw but seems to only be doing 100w out on 
ssb. Have checked alc on radio and seems to be ok. Have swr of 1.1-1 I am 
stumped. Anyone have any ideas?

Mike
K0ISP

Sent from Mail for Windows 10

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>