Here's a total stab in the dark.
Does it have a step start resistor/relay setup?
If so, the relay may not be coming in or the contacts ar not making,
which will leave the resistor in circuit. When you draw current through
it for a prolonged period, it will get might hot and perhaps be the
cause of that smoke.
73 and good luck.
Alek. VK6APK
On 6/01/2018 6:12 PM, mike george via Amps wrote:
thanks to all who responded to my post on 12-11-17 on this amp problem. i tried
to follow every suggestion from all who responded till i got to the filter
lytics. was not sure so went ahead and dropped too much $$ on a re-cap kit on
ebay. sadly the problem remains. i thought at first i caught a slight smell
when the problem occured but dismissed it as the wood stove fumes from next
room. this time with new caps installed i ran it a little longer and tried to
touch up the tuning. yup, the smell was stronger and i stuck my head under the
table to see smoke. i could not kill power, remove the cover and look for the
source in time to see it. after voltage safty check felt for hot part but found
none. i dont think a rf deck problem is the cause, but not real sure how to
proceed finding this. any further ideas will be greatly appreciated. 73 mike
Kilowatt Six
No High Voltage. how could i know a vanity call sign could come true.....
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
--
From sunny Binningup
Our new house.
https://17coronation.wordpress.com
Family Businesses:
SP Electrical. www.spelectrical.net.au
The Velvet Fox. www.facebook.com/TheVelvetFox
Smart Design Electrical. 0417 602 032
Perth Interiors. https://www.instagram.com/perthinteriors/
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|