1.9 Gal of PCB oil. Yikes!
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of JTB ??
Sent: Saturday, November 04, 2017 12:45 PM
To: amps@contesting.com
Subject: Re: [Amps] Pole pigs removed from oil ??
I used a pair of these (see below) in series and a GE pole pig on a 4-1000A
home brew amp in 1970. PCB galore ! ! !
https://www.recycledgoods.com/general-electric-pyranol-capacitor-3000vdc-120uf-18f268/?gclid=EAIaIQobChMI-rKv3q2l1wIViFmGCh0TCAtoEAYYASABEgKlEvD_BwE
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Jim W7RY
Sent: Saturday, November 4, 2017 11:59 AM
To: Mike & Becca Krzystyniak <k9mk@flash.net>; 'Kevin Stover, AC0H'
<kstover@ac0h.net>; amps@contesting.com
Subject: Re: [Amps] Pole pigs removed from oil ??
Here is a much cheaper one.
https://www.jointingtech.co.uk/Clor-n-Oil-50ppm-PCB-Test-Kit
73
Jim W7RY
-----Original Message-----
From: Jim W7RY
Sent: Saturday, November 04, 2017 10:55 AM
To: Mike & Becca Krzystyniak ; 'Kevin Stover, AC0H' ; amps@contesting.com
Subject: Re: [Amps] Pole pigs removed from oil ??
Test kit....
http://www.andax.com/clor-n-oil-kit---50-ppm-details.aspx
73
Jim W7RY
-----Original Message-----
From: Mike & Becca Krzystyniak
Sent: Saturday, November 04, 2017 10:48 AM
To: 'Kevin Stover, AC0H' ; amps@contesting.com
Subject: Re: [Amps] Pole pigs removed from oil ??
Agreed, today I would never dump the oil.
Back then, with all the dumping without regard to the impacts we're lucky we
didn't exterminate ourselves...
Maybe that vote is still out...
I'm not sure what oil they might be using today. It may be relatively safer,
but I wouldn't pour it out either.
73 Mike K9MK
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Kevin Stover, AC0H
Sent: Saturday, November 04, 2017 10:35 AM
To: amps@contesting.com
Subject: Re: [Amps] Pole pigs removed from oil ??
I'm a little concerned about people just dumping the oil.
Transformer oil is a famous source of PCB's. How old does a pole pig have to be
before you can safely say there are no PCB's in the oil?
On 11/2/2017 9:49 PM, Mike & Becca Krzystyniak wrote:
> Hi Jim,
>
> I used one that came off our power lines back in the 70's when
> they
were
> updating the grid.
> The oil was for heat transfer.
>
> I pulled it from the oil and let it dry out for a few months.
> It never really drys but the weeping eventually stopped.
>
> Mine ran a pair of 3-1000Z. 2400 VAC on the secondary.
> It loafed along at legal limit.
> I think I paid all of $25 for it.
>
> Never had an issue with insulation breakdown.
>
> 73's Mike K9MK
>
> -----Original Message-----
> From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Jim
> Thomson
> Sent: Thursday, November 02, 2017 8:44 PM
> To: amps@contesting.com
> Subject: [Amps] Pole pigs removed from oil ??
>
> Have any of you folks used or know of anybody who has used pole
> pigs..removed from oil ?
> Is there any inherent risk with insulation breakdown etc ?
>
> Jim VE7RF
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
--
R. Kevin Stover AC0H
FISTS #11993
SKCC #215
NAQCC #3441
ARRL
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
________________________________
Confidentiality Notice: This e-mail message, including any attachments, is for
the sole use of the intended recipient(s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|