Conrad PA5Y wrote:
I On it's way to me from a faraway land is a PCB that is designed to be
part of a socket for a 3CX800. It has 2.5mm clearance plated through
holes. I need some solder in pins to make it into a working socket. I do
not know the diameter of the 3CX800 pins, I assume that such pins must
exist or the PCB would never have been produced in the first place.
Could someone point me to some suitable solder in pins with a 2.5mm
outside diameter and a hole suitable for a snug fit to the 3CX800 pins?
Failing that the diameter of the tube pins would suffice. Yes I have a
tube in an amplifier and yes I can measure it myself but I am sure
someone will already know the answer to this and it saves me dismantling
it until I am really ready :-)
The SVETLANA TECHNICAL DATA for the 4CX800A High Performance Tetrode
says: 0.053 0.060 inches es 1.34 1.53 mm.
--
Ron KA4INM - Youvan's corollary:
Every action results in unwanted side effects.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|